Booster Indy VII
Medium pressure (40 bar) 4-stage pumping unit.
- Medium pressure (40 bar) 4-stage pumping unit.
- Single lever in aluminum,
- Crankshaft in forged steel
- forced lubrication on the 4th stage cylinder by gear pump
- Oil filtration
- Aluminum connecting rods
- Main roller bearings
- Roller connecting rod bearings
- 2nd and 3rd stage cylinders in special cast iron
- 4th stage cylinder in special treated steel.
- Stainless steel intake and exhaust valves
- Interstage cooling pipes in stainless steel
- Separator after the 2nd, 3rd and 4th stage
- Safety valves after each stage
- Oil level sensor
Electric motor
One of the fundamental parts of the compressor: the motor transfers the motion to the pumping unit through the belt. The three-phase electric motor is available on this model with 11 kW.
Compressor control and automatic condensate drainage system
- Motor protection switch.
- Autostop + Autostart.
- Drainage of the separator between individual stages during compressor operation (standard drainage interval every 15 minutes for a period of 6 seconds).
- Interstage pressure gauges display the working pressure for the individual compression stages. This pressure information allows you to check the tightness of the valves (inlet and outlet) of each stage and to quickly identify potential sources of failure.
Interstage pressure gauges are mounted in the compressor frame.
Stand-alone filter system with Hyperfilter
The filter system, with activated carbon cartridge, is mounted on a stand-alone stand and includes:
- Safety valve (variable according to customer’s request)
- Pressure maintenance valve
- External Hyperfilter and separator kit
- Leg kit
- Automatic condensate drain. Removes water from the intermediate separator and the final separator automatically during operation (every 7 minutes).
Standard equipment
Double PED certified Hyperfilter filter system
Oil pump with pressure gauge
Pressure maintenance valve
Condensate separation system
Automatic condensate drain
Automatic shutdown
Automatic reboot
Electronic pressure switch
Frame color Black RAL 9005
Technical data
Type of gas
Air – Helium – Nitrogen – Argon
Intake pressure
2 to 8 bar
Nominal pressure
40 bar
Working pressure
40 bar
Max working pressure
40 bar
Permissible ambient temperature range
-10° C ÷ +40° C
Permissible altitude
0 ÷ 1.500 m SLM
Max permissible tilt
15°
Design
Open
Operating voltage, standard
400 V, 50 Hz
Other operating voltage
On three-phase electric motor at 60Hz the power (kW / Hp) increases by 20%.230 V, 50 Hz / 440 V, 60 Hz / 230 V, 60 Hz
Oil
Synthetic Coltri Oil ST 755
Oil change interval
1 year / 1,000 h
Frame
Steel – color Black RAL 9005 – Powder coated – scratch resistant
Compressor
Charging rate
11 kW
From 721 l/min to 2.163 l/min
From 43 m3/h to 130 m3/h
From 25.2 CFM to 75.7 CFM
Cooling air flow, min.
11 kW
1.960 m3/h
Weight
Standard model. Weight and dimensions may vary depending on accessories.11 kW
225 kg
496 lb
Dimensions
(W x D x H)115 x 60 x 79,6 cm
45.3 x 23.6 x 31.3 in
Motor
Power
11 kW
11 kW
14 Hp
Type
11 kW
Three-phase electric
Operating voltage/frequency
Different voltage / frequency available on request.11 kW
400 V, 50 Hz
Rated current
11 kW
23 A
Speed (RPM)
11 kW
2.910
Protection class
IP55
Available models of Booster Indy VII
(Non-standard models available upon request)
Booster Indy VII 11 kW
Flow rate: 721 l/min to 2,163 l/min
