H2 Booster RC
Elevate the power of clean energy, transforming the future.
A green breakthrough in vehicle charging systems. Designed to recharge hydrogen-powered cars efficiently and safely. Its ability to operate at high pressure ensures rapid refueling, significantly reducing waiting time for users. Using hydrogen as an energy source makes it an environmentally friendly option, helping to reduce greenhouse gas emissions and promote sustainable mobility. It provides a maximum operating pressure of 360 bar with a refill capacity ranging from 55 and 265 l/min.
3-stage high pressure pumping unit for hydrogen.
- Monobloc in aluminum
- Crankshaft in forged steel
- Spray lubrication with tang immersed in oil
- Pipes, fittings and nuts made of AISI 316 stainless steel
- Condensate separator after the final stage
- Safety valves after each stage of bell compression
- Pressure maintenance and control valve after final air filter purification.
- Die-cast aluminum cylinders with nicasil barrel coating
- Forged aluminum connecting rods
- Forged steel crankshaft
- Second and third stage valves made of stainless steel
- Heavy-duty roller bearings
- Hardened steel third stage with 5 segments made of special cast iron
- Second and third stages with thrust pads to eliminate lateral forces on the pistons
- Monobloc in aluminum
- Crankshaft in forged steel
- Spray lubrication with tang immersed in oil
- Pipes, fittings and nuts made of AISI 316 stainless steel
- Condensate separator after the final stage
- Safety valves after each stage of bell compression
- Pressure maintenance and control valve after final air filter purification.
- Die-cast aluminum cylinders with nicasil barrel coating
- Forged aluminum connecting rods
- Forged steel crankshaft
- Second and third stage valves made of stainless steel
- Heavy-duty roller bearings
- Hardened steel third stage with 5 segments made of special cast iron
- Second and third stages with thrust pads to eliminate lateral forces on the pistons
Standard equipment
Intake filter
Maxifilter filter system
4.5 m filling hose
Gas exhaust chimney
Frame color RAL 7035 / RAL 7016
Technical data
Type of gas
Hydrogen
Intake pressure
2 to 8 bar
Nominal pressure
360 bar
Working pressure
300 – 360 bar
Max working pressure
360 bar
Permissible ambient temperature range
-10° C ÷ +40° C
Permissible altitude
0 ÷ 1.500 m SLM
Max permissible tilt
6°
Design
Cabinet insonorizzato
Operating voltage, standard
400 V, 50 Hz
Other operating voltage
On three-phase electric motor at 60Hz the power (kW / Hp) increases by 20%.230 V, 50 Hz / 230 V, 60 Hz / 400 V, 60 Hz
Oil
Synthetic Coltri Oil ST 755
Oil change interval
1 year / 1,000 h
Frame
Steel – color RAL 7035 – RAL 7016 Powder coating – scratch resistant
Noise
LpA 67 dB
Compressor
Charging rate
3 KW
From 55 l/min to 160 l/min
From 3.3 m3/h to 9.6 m3/h
From 2 CFM to 5.6 CFM
4 KW
From 71.6 l/min to 215 l/min
From 4.3 m3/h to 12.9 m3/h
From 2.5 CFM to 7.6 CFM
5,5 KW
From 88.3 l/min to 265 l/min
From 5.3 m3/h to 15.9 m3/h
From 3.1 CFM to 9.4 CFM
Purification system
Maxifilter
Cooling air flow, min.
3 KW
930 m3/h
4 KW
1.240 m3/h
5,5 KW
1.705 m3/h
Weight
Standard model. Weight and dimensions may vary depending on accessories.3 KW
160 kg
353 lb
4 KW
180 kg
397 lb
5,5 KW
180 kg
397 lb
Dimensions
(W x D x H)70 x 67 x 105 cm
27.6 x 26.4 x 41.3 in
Motor
Power
3 KW
3 kW
4 Hp
4 KW
4 kW
5.5 Hp
5,5 KW
5,5 kW
7.5 Hp
Type
3 KW
Three-phase electric
4 KW
Three-phase electric
5,5 KW
Three-phase electric
Operating voltage/frequency
Different voltage / frequency available on request.3 KW
400 V, 50 Hz
4 KW
400 V, 50 Hz
5,5 KW
400 V, 50 Hz
Rated current
3 KW
6.4 A
4 KW
15 A
5,5 KW
11.6 A
Speed (RPM)
3 KW
2.840
4 KW
2.840
5,5 KW
2.850
Protection class
IP55
Available models of H2 Booster RC
(Non-standard models available upon request)
H2 Booster RC 3 KW
Flow rate: 55 l/min to 160 l/min
H2 Booster RC 4 KW
Flow rate: from 41.7 l / min to 215 l / min
H2 Booster RC 5.5 KW
Flow rate: 88.3 l/min to 265 l/min