CNG Booster RC

Compact, robust, performing.
And a lot of Coltri.

Designed to compress previously treated and filtered natural gas and biomethane with a suction pressure between 2 and 8 bar and a final pressure of up to 250 bar.
Robust and compact, created to fill cylinders for gas storage. The use of the products of the CNG BOOSTER RC line is easy and can be done in total safety. The equipment includes a remote electromechanical panel with 5 meters of cable for control and automatic stop function when the tank is full.

3-stage high pressure pumping unit for methane.

  • Monobloc in aluminum
  • Crankshaft in forged steel
  • Forced lubrication on 2nd and 3rd stage cylinders by gear pump
  • Oil filtration
  • Oversized interstage cooling pipes
  • Double final separator
  • Forged aluminum connecting rods
  • Main roller bearings
  • Roller connecting rod bearings
  • 2nd stage cylinder in aluminum with hard nicasil coating
  • 2nd and 3rd stage slide guide cylinders in aluminum with hard nicasil coating
  • 3rd stage cylinder made of special treated steel
  • Stainless steel intake and exhaust valves
  • Stainless steel interstage cooling tubes
  • Separator after the 2nd and 3rd stage
  • Safety valves after each stage
  • Oil level sensor
  • Service stage that recovers the gas that leaks to the monoblock and feeds it back into the 2nd stage

Simplicity comes standard.

Imagine having a compressor capable of great performance and endowed with extraordinary solidity. What would all this be without absolute simplicity in managing it?
We believe that innovation is for this: to make everything simpler.

With them you are safe.

Coltri CNG compressors put safety first: they are equipped with sensors that stop the machine in case of leaks; and are equipped with inlet and outlet solenoid valves to regulate the operation of the machine and the system.

Standard equipment

Intake filter
Hitch-hiking
Maxifilter filter system
Ventilation tube
Low pressure switch at gas inlet
Frame color RAL 7035

Technical data

Type of gas

Natural Gas – Methane

Intake pressure

2 to 8 bar

Nominal pressure

250 bar

Working pressure

200 bar o 250 bar

Max working pressure

200 bar o 250 bar

Permissible ambient temperature range

-10° C ÷ +40° C

Permissible altitude

0 ÷ 1.500 m SLM

Max permissible tilt

Design

Cabinet insonorizzato

Operating voltage, standard

400 V; 50 Hz

Other operating voltage

On three-phase electric motor at 60Hz the power (kW / Hp) increases by 20%.

230 V, 50 Hz / 230 V, 60 Hz / 400 V, 60 Hz

Oil

Synthetic Coltri Oil ST 755

Oil change interval

1 year / 1,000 h

Frame

Steel thickness 1.5 mm – color RAL 7035 – RAL 7016 Powder coating – scratch-resistant

Noise

LpA 67 dB

Compressor

Charging rate

3 KW

From 55 l/min to 160 l/min

From 3.3 m3/h to 9.6 m3/h

From 2 CFM to 5.6 CFM

4 KW

From 71.6 l/min to 215 l/min

From 4.3 m3/h to 12.9 m3/h

From 2.5 CFM to 7.6 CFM

5,5 KW

From 88.3 l/min to 265 l/min

From 5.3 m3/h to 15.9 m3/h

From 3.1 CFM to 9.3 CFM

Purification system

Maxifilter

Cooling air flow, min.

3 KW

2.400 m3/h

4 KW

2.400 m3/h

5,5 KW

2.400 m3/h

Weight

Standard model. Weight and dimensions may vary depending on accessories.
3 KW

160 kg

353 lb

4 KW

180 kg

397 lb

5,5 KW

180 kg

397 lb

Dimensions

(W x D x H)

70 x 67 x 105 cm

27.5 x 26.4 x 41.3 in

Motor

Power

3 KW

3 kW

4 Hp

4 KW

4 kW

5.5 Hp

5,5 KW

5,5 kW

7.5 Hp

Type

3 KW

Three-phase electric

4 KW

Three-phase electric

5,5 KW

Three-phase electric

Operating voltage/frequency

Different voltage / frequency available on request.
3 KW

400 V, 50 Hz

4 KW

400 V, 50 Hz

5,5 KW

400 V, 50 Hz

Rated current

3 KW

13.2 A

4 KW

13.2 A

5,5 KW

13.2 A

Speed (RPM)

3 KW

2.800

4 KW

2.800

5,5 KW

2.800

Protection class

IP55 (TEFC)

The available models of CNG Booster RC

(Non-standard models available upon request)

Discover CNG Booster RC at 360°