Booster Indy I
Medium pressure (40 bar) 3-stage pumping unit.
- Monobloc in aluminum
- Forged steel gooseneck crankshaft
- Forced lubrication on 2nd and 3rd stage cylinders by gear pump
- Oil filtration.
- Increased and stainless steel interstage cooling tubes
- Tubes, fittings and nuts made of AISI 316 stainless steel
- Outlet temperature about 15 °C higher than the cooling air temperature
- Final separator
- Forged aluminum connecting rods
- Main roller bearings
- Roller connecting rod bearings
- Aluminum cylinders with hard nicasil coating
- Stainless steel intake and exhaust valves
- Final safety valve
Electric motor
One of the fundamental parts of the compressor: the motor transfers the motion to the pumping unit through the belt. The 7.5 three-phase electric motor is available on this model kW.
Chassis
Essential and compact, this frame is designed to facilitate portability. The tilting motor-holder plate guarantees the constant tension of the V-belt. The protective casing directs cooling air over the cylinders and inter-stage pipes. This guarantees a high compression efficiency.
Standard equipment
Oil pump with pressure gauge
Pressure maintenance valve
Condensate separation system
Automatic condensate drain
Automatic shutdown
Automatic reboot
Input pressure switch
Frame color Black RAL 9005
Technical data
Type of gas
Breathing Air (EN 12021) – Helium – Nitrogen – Argon
Intake pressure
2 to 8 bar
Nominal pressure
40 bar
Working pressure
40 bar
Max working pressure
40 bar
Permissible ambient temperature range
-10° C ÷ +40° C
Permissible altitude
0 ÷ 1.500 m SLM
Max permissible tilt
15°
Design
Basic
Operating voltage, standard
400 V, 50 Hz
Other operating voltage
On three-phase electric motor at 60Hz the power (kW / Hp) increases by 20%.230 V, 50 Hz / 440 V, 60 Hz / 230 V, 60 Hz
Oil
Synthetic Coltri Oil ST 755
Oil change interval
1 year / 1,000 h
Frame
Steel – color Black RAL 9005 – Powder coated – scratch resistant
Compressor
Charging rate
7,5 kW
From 489 l/min to 1.466 l/min
From 29 m3/h to 88 m3/h
From 17.3 CFM to 51.8 CFM
Cooling air flow, min.
7,5 kW
1.400 m3/h
Weight
Standard model. Weight and dimensions may vary depending on accessories.7,5 kW
105 kg
231 lb
Dimensions
(W x D x H)103 x 44,7 x 61,7 cm
40.5 x 17.5 x 24.3 in
Motor
Power
7,5 kW
7,5 kW
10 Hp
Type
7,5 kW
Three-phase electric
Operating voltage/frequency
Different voltage / frequency available on request.7,5 kW
400 V, 50 Hz
Rated current
7,5 kW
15 A
Speed (RPM)
7,5 kW
2.870
Protection class
IP55
Available models of Booster Indy I
(Non-standard models available upon request)
Booster Indy I 7.5 kW
Flow rate: 489 l/min to 1,466 l/min
