Ace VI Zero Loss

Simplicity comes standard.

Imagine having a compressor capable of great performance and endowed with extraordinary solidity. What would all this be without absolute simplicity in managing it?
We believe that innovation is for this: to make everything simpler.

4-stage pumping unit with gas recovery

  • 4-stage high pressure pumping unit.
  • Single lever in aluminum,
  • Crankshaft in forged steel
  • forced lubrication on the 4th stage cylinder by gear pump
  • Oil filtration
  • Aluminum connecting rods
  • Main roller bearings
  • Roller connecting rod bearings
  • 2nd and 3rd stage cylinders in special cast iron
  • 4th stage cylinder in special treated steel.
  • Stainless steel intake and exhaust valves
  • Interstage cooling pipes in stainless steel
  • Separator after the 2nd, 3rd and 4th stage
  • Safety valves after each stage
  • Oil level sensor
  • With service stage that recovers the gas that leaks towards the monoblock and reintroduces it in the 2nd stage


Electric motor

One of the fundamental parts of the compressor: the motor transfers the motion to the pumping unit through the belt. The 11 to 1 three-phase electric motor is available on this model5 kW.


Electrical cabinet

  • ON / OFF switch with motor protection switch.
  • Electromechanical pressure switch that stops the compressor at the final pressure.
  • Drainage of all separators between the individual stages and also of the final separator during compressor operation
  • Timer for automatic condensate drain.
  • Integrated no-load start (automatic drain every time the unit is switched off).
  • 5 liter condensate collection tank, with silencer; capacity of about 3 liters, for the ecological disposal of condensate.
  • Interstage pressure gauges display the working pressure for the individual compression stages. This pressure information allows you to check the tightness of the valves (inlet and outlet) of each stage and to quickly identify potential sources of failure.



Silenced chassis with vertical development, made for environments that require a low level of noise. The oil level and drain reported outside, the control console equipped with inter-stage pressure gauges, the oil pressure gauge, the internal temperature indicator, the presence alarm and incorrect phase sequence, the lack alarm oil and the start, stop and manual condensate drain commands allow easy management and maintenance of the compressor.


The best for you,
the best for your work.

The Booster compressors prove it: the best possible machine is the one that meets the specific needs of “that” customer, customizing the response in terms of reliability and performance.
Whether we are talking about air, helium, hydrogen, nitrogen, the customer comes before the solution: this is our “creed”.

Standard equipment

Double PED certified Hyperfilter filter system
Condensate separation system
Frame color Black RAL 9005

Technical data

Type of gas

Breathing Air (EN 12021) – Helium – Nitrogen – Argon

Intake pressure

2 to 5 bar

Nominal pressure

250 bar / 330 bar

Working pressure

232 bar / 300 bar

Max working pressure

420 bar

Permissible ambient temperature range

-10° C ÷ +40° C

Permissible altitude

0 ÷ 1.500 m SLM

Max permissible tilt



Cabinet insonorizzato con fonoassorbente

Operating voltage, standard

400 V; 50 Hz

Other operating voltage

On three-phase electric motor at 60Hz the power (kW / Hp) increases by 20%.

230 V, 50 Hz / 440 V, 60 Hz / 230 V, 60 Hz


Synthetic Coltri Oil ST 755

Oil change interval

1 year / 1,000 h


Steel thickness 1.5 mm – color Blue RAL 9005 – Powder coating – scratch-resistant


Charging rate

11 KW

From 250 l/min to 620 l/min

From 15 m3/h to 37 m3/h

From 8.8 CFM to 21.9 CFM

15 KW

From 280 l/min to 690 l/min

From 17 m3/h to 41.4 m3/h

From 9.8 CFM to 24.3 CFM

Purification system

2 Hyperfilter a carbone attivo

Cooling air flow, min.

11 KW

1.960 m3/h

15 KW

1.960 m3/h


Standard model. Weight and dimensions may vary depending on accessories.
11 KW

373 kg

943 lb

15 KW

463 kg

1.020 lb


(W x D x H)

93,5 x 130,2 x 173,5 cm

36.8 x 51.3 x 68.3 in



11 KW

11 kW

15 Hp

15 KW

15 kW

20 Hp


11 KW

Three-phase electric

15 KW

Three-phase electric

Operating voltage/frequency

Different voltage / frequency available on request.
11 KW

400 V, 50 Hz

15 KW

400 V, 50 Hz

Rated current

11 KW

23 A

15 KW

31 A

Speed (RPM)

11 KW


15 KW


Protection class


Available models of Ace VI Zero Loss

(Non-standard models available upon request)

Discover Ace VI Zero Loss at 360°.