CNG RC
Even small, it works great.
Designed to recompress previously treated and filtered natural gas and biomethane. These compressors are designed for refueling vehicles powered by natural gas. They are suitable for home use or for small fleets. The use of the products of the CNG RC line is simple and safe, they are equipped with an electromechanical remote control panel with 5 meters of cable and an automatic stop function when the tank is full.
3-stage high pressure pumping unit for methane.
- Monobloc in aluminum
- Crankshaft in forged steel
- Splash lubrication
- Forged aluminum connecting rods
- Main roller bearings
- Roller connecting rod bearings
- 1st and 2nd stage cylinders in aluminum with hard nicasil coating
- 2nd and 3rd stage slide guide cylinders in aluminum with hard nicasil coating
- 3rd stage cylinder in special treated steel.
- Stainless steel intake and exhaust valves
- Interstage cooling pipes in stainless steel
- Safety valves after each stage
- Oil level sensor
- Monobloc in aluminum
- Crankshaft in forged steel
- Splash lubrication
- Forged aluminum connecting rods
- Main roller bearings
- Roller connecting rod bearings
- 1st and 2nd stage cylinders in aluminum with hard nicasil coating
- 2nd and 3rd stage slide guide cylinders in aluminum with hard nicasil coating
- 3rd stage cylinder in special treated steel.
- Stainless steel intake and exhaust valves
- Interstage cooling pipes in stainless steel
- Safety valves after each stage
- Oil level sensor
Standard equipment
Intake filter
Hitch-hiking
Maxifilter filter system
Vent pipe
Natural gas refueling gun with direct action NGV1
4.5 m filling hose
Frame color RAL 7035
Technical data
Type of gas
Natural Gas – Methane
Intake pressure
Max 200 millibars
Nominal pressure
250 bar
Working pressure
200 bar o 250 bar (da definire all’ordine)
Max working pressure
200 bar o 250 bar
Permissible ambient temperature range
-10° C ÷ +40° C
Permissible altitude
0 ÷ 1.500 m SLM
Max permissible tilt
6°
Design
Cabinet insonorizzato
Operating voltage, standard
400 V; 50 Hz
Other operating voltage
On three-phase electric motor at 60Hz the power (kW / Hp) increases by 20%.230 V, 50 Hz / 230 V, 60 Hz / 400 V, 60 Hz/ 480 V, 60 Hz
Oil
Synthetic Coltri Oil ST 755
Oil change interval
1 year / 1,000 h
Frame
Steel thickness 1.5 mm – color RAL 6018 – RAL 7035 – RAL 7016 Powder coating – scratch-resistant
Noise
LpA 67 dB
Compressor
Charging rate
Measured during 10 liters cylinder filling from 0-200 bar tolerance +/- 5% at + 20° C ambient temperature.85 EM
85 l/min
5.1 m3/h
3.8 CFM
85 ET
85 l/min
5.1 m3/h
3.8 CFM
170 ET
170 l/min
10.2 m3/h
7.5 CFM
266 ET
266 l/min
15.9 m3/h
11.8 CFM
Purification system
Maxifilter
Cooling air flow, min.
85 EM
2.400 m3/h
85 ET
2.400 m3/h
170 ET
2.400 m3/h
266 ET
2.400 m3/h
Weight
Standard model. Weight and dimensions may vary depending on accessories.85 EM
160 kg
353 lb
85 ET
160 kg
353 lb
170 ET
180 kg
397 lb
266 ET
180 kg
397 lb
Dimensions
(W x D x H)70 x 67 x 105 cm
27.5 x 26.4 x 41.3 in
Motor
Power
85 EM
3 kW
4 Hp
85 ET
3 kW
4 Hp
170 ET
4 kW
5.5 Hp
266 ET
5.5 kW
7.5 Hp
Type
85 EM
Single-phase electric
85 ET
Three-phase electric
170 ET
Three-phase electric
266 ET
Three-phase electric
Operating voltage/frequency
Different voltage / frequency available on request.85 EM
230 V, 50 Hz
85 ET
400 V, 50 Hz
170 ET
400 V, 50 Hz
266 ET
400 V, 50 Hz
Rated current
85 EM
13.2 A
85 ET
13.2 A
170 ET
13.2 A
266 ET
13.2 A
Speed (RPM)
85 EM
2.800
85 ET
2.800
170 ET
2.800
266 ET
2.800
Protection class
IP55 (TEFC)
The available models of CNG RC
(Non-standard models available upon request)
CNG RC 85 EM
Flow rate: 85 l / min
Tank refill (80 liters): 3 hours 8 minutes
CNG RC 85 ET
Flow rate: 85 l / min
Tank refill (80 liters): 3 hours 8 minutes
CNG RC 170 ET
Flow rate: 170 l / min
Tank refill (80 liters): 1 hour 15 minutes
CNG RC 266 ET
Flow rate: 266 l / min
Tank refill (80 liters): 1 hour